Universal Centrifuge model PLC-025

Features:

-          Brushless drive motor, maintenance free;

-          RPM /RCF Display and conversion;

-          Choice of swing-out rotor and fixed angle rotor;

-          Imbalance alarm & shutout;

-          Interlocking lid system (Lid can’t be opened during spinning);

-          Lid-open override device in case of power failure;

-          Automatic braking system within 1 minute;

-          Errors self-diagnostic detection (5 errors);

-          Emergency STOP;

-          Ideal for general purpose or PRP use in hospital & clinic;

-          The universal power source from 100V- 240V, 50/60Hz;

-          Built-in power stabilizer within 88V- 264V preventing power surge accidently. 

Intended use: 

A device that is a general-purpose laboratory centrifuge used to separate the components of suspensions by the application of centrifugal force. This device is intended to centrifuge patient samples, e.g. body fluids, either alone or after addition of reagents or other additives before measuring analytes. It is typically a low speed (up to 6000rpm) or medium speed (up to 12000rpm) machine. Ideal for use in clinical laboratory, histology, haematology, immunology, microbiology, pathology, serology and toxicology.

Specifications:

Note:

WARNING: Maximum speed is restricted below 4000rpm, injury or damage may be occurred if speed up to 4500rpm. 

Buckets (Tube carriers) (max 4000rpm at 2639xg):

Note: Applied to tubes of 13 x 75mm (3ml ~ 7ml) 

Technical Data: 

-          Sophisticated module electronic circuit for easy maintenance.

-          Stainless steel interior chamber and exterior body with powder coating easy for cleaning and scratch free.

-          Indicators: Power, Timer, RPM/ RCF,LID OPEN, LID LOCK, Alarm, SPIN (SV), STOP, START.

-          Module Microprocessor-based circuit board ensures excellent performance and easy for maintenance.

-          Errors detection: Imbalance, Disengaged connector, overload, Driver overheat, Motor overheat.

-          Convert RPM and RCF readings automatically from one to the other just press the keypad slightly.